News

Material world: graphene’s versatility promises new applications

July 09, 2009

3110188521_4d9e0b934d_m

N.J. Tao, director of the Center for Bioelectronics and Biosensors, has experimentally measured an important property of graphene.

Since its discovery just a few years ago, graphene has climbed to the top of the heap of new super-materials poised to transform the electronics and nanotechnology landscape. As N.J. Tao, a researcher at the Biodesign Institute of Arizona State University explains, this two-dimensional honeycomb structure of carbon atoms is exceptionally strong and versatile. Its unusual properties make it ideal for applications that are pushing the existing limits of microchips, chemical sensing instruments, biosensors, ultracapacitance devices, flexible displays and other innovations.

In the latest issue of Nature Nanotechnology Letters, Tao describes the first direct measurement of a fundamental property of graphene, known as quantum capacitance, using an electrochemical gate method. A better understanding of this crucial variable should prove invaluable to other investigators participating in what amounts to a gold rush of graphene research.

Although theoretical work on single atomic layer graphene-like structures has been going on for decades, the discovery of real graphene came as a shock.  “When they found it was a stable material at room temperature,” Tao says,  “everyone was surprised.” As it happens, minute traces of graphene are shed whenever a pencil line is drawn, though producing a 2-D sheet of the material has proven trickier.  Graphene is remarkable in terms of thinness and resiliency. A one-atom thick graphene sheet sufficient in size to cover a football field, would weigh less than a gram. It is also the strongest material in nature—roughly 200 times the strength of steel. Most of the excitement however, has to do with the unusual electronic properties of the material.

tao.pngMapping impurities

Two plots of quantum capacitance as a function of potential.

In a) various theoretical predictions of quantum capacitance are shown for graphene samples from pure, (the bottom V-shaped plot) to those above, indicating successively greater levels of impurity.

In b) the red curve indicates theoretical prediction of quantum capacitance in graphene as a function of potential. The blue line shows the closely matching results of experimental measurements. Variations from theoretical ideal are the result of charged impurities in the graphene sample.

 

Graphene displays outstanding electron transport, permitting electricity to flow rapidly and more or less unimpeded through the material. In fact, electrons have been shown to behave as massless particles similar to photons, zipping across a graphene layer without scattering. This property is critical for many device applications and has prompted speculation that graphene could eventually supplant silicon as the substance of choice for computer chips, offering the prospect of ultrafast computers operating at terahertz speeds, rocketing past current gigahertz chip technology. Yet, despite encouraging progress, a thorough understanding of graphene’s electronic properties has remained elusive. Tao stresses that quantum capacitance measurements are an essential part of this understanding.

Capacitance is a material’s ability to store energy. In classical physics, capacitance is limited by the repulsion of like electrical charges, for example, electrons. The more charge you put into a device, the more energy you have to expend to contain it, in order to overcome charge repulsion. However, another kind of capacitance exists, and dominates overall capacitance in a two-dimensional material like graphene. This quantum capacitance is the result of the Pauli exclusion principle, which states that two fermions—a class of common particles including protons, neutrons and electrons—cannot occupy the same location at the same time. Once a quantum state is filled, subsequent fermions are forced to occupy successively higher energy states. As Tao explains, “it’s just like in a building, where people are forced to go to the second floor once the first level is occupied.”

In the current study, two electrodes were attached to graphene, and a voltage applied across the material’s two-dimensional surface by means of a third, gate electrode. Plots of voltage vs. capacitance can be seen in the figure above. In Tao’s experiments, graphene’s ability to store charge according to the laws of quantum capacitance, were subjected to detailed measurement. The results show that graphene’s capacitance is very small. Further, the quantum capacitance of graphene did not precisely duplicate theoretical predictions for the behavior of ideal graphene. This is due to the fact that charged impurities occur in experimental samples of graphene, which alter the behavior relative to what is expected according to theory.

Tao stresses the importance of these charged impurities and what they may mean for the development of graphene devices. Such impurities were already known to affect electron mobility in graphene, though their effect on quantum capacitance has only now been revealed. Low capacitance is particularly desirable for chemical sensing devices and biosensors as it produces a lower signal-to-noise ratio, providing for extremely fine-tuned resolution of chemical or biological agents. Improvements to graphene will allow its electrical behavior to more closely approximate theory. This can be accomplished by adding counter ions to balance the charges resulting from impurities, thereby further lowering capacitance.  

The sensitivity of graphene’s single atomic layer geometry and low capacitance promise a significant boost for biosensor applications. Such applications are a central topic of interest for Tao, who directs the Biodesign Institute’s Center for Bioelectronics and Biosensors. As Tao explains, any biological substance that interacts with graphene’s single atom surface layer can be detected, causing a huge change in the properties of the electrons.

One possible biosensor application under consideration would involve functionalizing graphene’s surface with antibodies, in order to precisely study their interaction with specific antigens. Such graphene-based biosensors could detect individual binding events, given a suitable sample.  For other applications, adding impurities to graphene could raise overall interfacial capacitance. Ultracapacitors made of graphene composites would be capable of storing much larger amounts of renewable energy from solar, wind or wave energy than current technologies permit.

Because of graphene’s planar geometry, it may be more compatible with conventional electronic devices than other materials, including the much-vaunted carbon nanotubes. “You can imagine an atomic sheet, cut into different shapes to create different device properties,” Tao says.

Since the discovery of graphene, the hunt has been on for similar two-dimensional crystal lattices, though so far, graphene remains a precious oddity.

Advanced Online Publication: http://www.nature.com/nnano/journal/vaop/ncurrent/full/nnano.2009.177.html

-Written by Richard Harth
Science Writer
Biodesign Institute
richard.harth@asu.edu

Bookmark and Share